home *** CD-ROM | disk | FTP | other *** search
- ACTIVE: n ; y=active, n=inactive
- MBBS_VERSION: 9.00 ; MBBS Version #
- PARENT_SERNUM: ; Serial# of Parent (Main Magnum board - ie: server)
- ENCRYPT_MAIL: N ; Encrypt Mail? (Y=yes, N=no)
- GEO_PRIVACY: Y ; Geographic Privacy? (Y=yes, N=no)
- INACTIVITY_TIMER: 300 ; # seconds (180-1800) of inactivity for autologoff
- TRACK_UTILIZATION: Y ; Y=Track BBS utilization, N=do NOT track
- MBBS_MODEM: Generic 2400 baud ; Modem description (up to 25 chars)
- MBBS_COUNTRY: USA ; Country (up to 20 chars)
- DATEFORMAT: U ; Date Format (E=Europe, U=USA)
- ;
- ; - - - Remove the following two "PRTY" lines for default priorities
- ;
- PRTY_CLASS: 2 ; Priority Class (0=dflt, 1=Idle, 2=Reg, 3=TimeCrit, 4=Fg)
- PRTY_LEVEL: 00 ; Priority Level (0=lowest, 31=highest)
- ;
- YMODEMG: N ; Allow Ymodem-G for non error-correcting modems? (Y/N)
- VERBOSE_CONNECT: CONNECT
- CMDIO: 5 ; I/O method for CMD.EXE from Sysop Menu
- ANNOUNCE_ONLY:n ; y=yes (announce only), n=no (regular BBS operation)
- NODE: 1
- DEVICENAME: COM1 ; Device name for node 1
- BAUDRATE: 2400 ; 110,150,300,600,1200,2400,4800,9600,19200,38400,57600
- PARITY: n ; N,E,O,M, or S (None,Even,Odd,Mark,Space)
- DATABITS: 8 ; 5, 6, 7, or 8
- STOPBITS: 1 ; 1, 1.5, or 2
- WAITCARRIER: 30 ; 1 to 255 seconds
- MODEMRESET:
- STARTUP1: AT S10=7S7=30E0V1M0Q0&C1&D2S0=0
- STARTUP2:
- STARTUP3:
- REINIT:
- DELAY1: 1000 ; Modem Delay 1
- DELAY2: 1000 ; Modem Delay 2
- DELAY3: 1000 ; Modem Delay 3
- DTELOCKED: n ; y=Lock DTE at BAUDRATE, n=do not lock
- ANSWERTYPE: r ; r=ring detect, a=autoanswer, d=DCD
- OPENMODE: n ; s=shared mode, n=nonshared mode
- ANSWERCMD: ATA ; Modem answer command
- ONHOOK: ATH0 ; Modem command to go onhook (hangup)
- OFFHOOK: ATH1 ; Modem command to go offhook
- ESC_CMDMODE: +++ ; Escape Command (enter cmd mode)
- ESC_GRDTIME: 700 ; Escape Command Guard Time (ms)
- GO_ONLINE: AT O ; Go back online (leave ESC_CMD)
- END_OFFHOOK: N ; Place phone offhook at MBBS termination (y=yes,n=no)
- RC_110: ; Result Code for 110 baud
- RC_150: ; Result Code for 150 baud
- RC_300: 1 ; Result Code for 300 baud
- RC_600: ; Result Code for 600 baud
- RC_1200: 5 ; Result Code for 1200 baud
- RC_2400: 10 ; Result Code for 2400 baud
- RC_4800: ; Result Code for 4800 baud
- RC_9600: ; Result Code for 9600 buad
- RC_12000: ; Result Code for 12000 baud
- RC_14400: ; Result Code for 14400 baud
- RC_16800: ; Result Code for 16800 baud
- RC_19200: ; Result Code for 19200 baud
- ERRORCHECK: n ; y=error correcting (EC) modem (ie: MNP/ARQ), n=none
- ERC_110: ; EC Result Code for 110 baud
- ERC_150: ; EC Result Code for 150 baud
- ERC_300: ; EC Result Code for 300 baud
- ERC_600: ; EC Result Code for 600 baud
- ERC_1200: ; EC Result Code for 1200 baud
- ERC_2400: ; EC Result Code for 2400 baud
- ERC_4800: ; EC Result Code for 4800 baud
- ERC_9600: ; EC Result Code for 9600 baud
- ERC_12000: ; EC Result Code for 12000 baud
- ERC_14400: ; EC Result Code for 14400 baud
- ERC_16800: ; EC Result Code for 16800 baud
- ERC_19200: ; EC Result Code for 19200 baud
- ;
- ; ------ Directory Paths (up to 65 chars each) ------
- ;
- PROGRAM_DIR: F:\magnum\pgm_dir
- SESSION_DIR: F:\magnum\ses_dir
- BULLETIN_DIR: F:\magnum\bul_dir
- MENU_DIR: F:\magnum\mnu_dir
- HELP_DIR: F:\magnum\hlp_dir
- DISPLAY_DIR: F:\magnum\dsp_dir
- EXTERNAL_DIR: F:\magnum\ext_dir
- RJE_DIR: F:\magnum\rje_dir
- MSG_DIR: F:\magnum\msg_dir
- WORK_DIR: F:\magnum\work_dir\1
- USERS_DIR: F:\magnum\user_dir
- SYSOUT_DIR: F:\magnum\sysout
- ;
- ; ------ File Directories (up to 65 chars each) ------
- ;
- FILEDIR_A: F:\magnum\general
- FILEDIR_B:
- FILEDIR_C:
- FILEDIR_D:
- FILEDIR_E:
- FILEDIR_F:
- FILEDIR_G:
- FILEDIR_H:
- FILEDIR_I:
- FILEDIR_J:
- FILEDIR_K:
- FILEDIR_L:
- FILEDIR_M:
- FILEDIR_N:
- FILEDIR_O:
- FILEDIR_P:
- FILEDIR_Q:
- FILEDIR_R:
- FILEDIR_S:
- FILEDIR_T:
- FILEDIR_U:
- FILEDIR_V:
- FILEDIR_W:
- FILEDIR_X:
- FILEDIR_Y:
- FILEDIR_Z: F:\magnum\rje
- ;
- ; ------ File Directory Descriptions (up to 40 chars each) ------
- ;
- FILEDES_A: General
- FILEDES_B:
- FILEDES_C:
- FILEDES_D:
- FILEDES_E:
- FILEDES_F:
- FILEDES_G:
- FILEDES_H:
- FILEDES_I:
- FILEDES_J:
- FILEDES_K:
- FILEDES_L:
- FILEDES_M:
- FILEDES_N:
- FILEDES_O:
- FILEDES_P:
- FILEDES_Q:
- FILEDES_R:
- FILEDES_S:
- FILEDES_T:
- FILEDES_U:
- FILEDES_V:
- FILEDES_W:
- FILEDES_X:
- FILEDES_Y:
- FILEDES_Z: RJE Results area (use your password)
- ;
- ; ------ Message Area Descriptions (up to 40 chars each) ------
- ;
- MSGDES_A: General Mail
- MSGDES_B:
- MSGDES_C:
- MSGDES_D:
- MSGDES_E:
- MSGDES_F:
- MSGDES_G:
- MSGDES_H:
- MSGDES_I:
- MSGDES_J:
- MSGDES_K:
- MSGDES_L:
- MSGDES_M:
- MSGDES_N:
- MSGDES_O:
- MSGDES_P:
- MSGDES_Q:
- MSGDES_R:
- MSGDES_S:
- MSGDES_T:
- MSGDES_U:
- MSGDES_V:
- MSGDES_W: System-Generated Messages
- MSGDES_X: File Descriptions
- MSGDES_Y:
- MSGDES_Z: Comments to/from Sysop
- ;
- ; ------ BBS Parameters ------
- ;
- BBS_NAME: My BBS
- BBS_STARTED: September 1, 1993
- TTL_CALLS: 0
- SYSOP_FIRST: Chuck
- SYSOP_MIDDLE: B
- SYSOP_LAST: Gilmore
- PAGING_BEGIN: 0 ; Beginning Paging time in seconds (0-86399)
- PAGING_END: 86399 ; Ending Paging time in seconds (0-86399)
- OPEN_BOARD: y ; y=open board, n=closed board
- REUSE_DEL: y ; y=reuse deleted IDnums for new users
- NEWUSER_LVL: 5 ; Security Level for new users
- CONFIRM_NEWRESP: N ; y=confirm new user logon responses, n=don't
- GET_PHONE: y ; Get newuser's phone # (y/n)
- GET_DOB: y ; Get newuser's date of birth (y/n)
- GET_COMPUTER: n ; Get newuser's computer type (y/n)
- GET_QUESTION: y ; Force newuser's questionairre (y/n)
- GET_COMPANY: y ; Get newuser's company name (y/n)
- GET_ADDRESS: n ; Get newuser's address info (y/n)
- GET_DATEFMT: y ; Get newuser's Date Format (y/n)
- GET_INTERESTS: y ; Get newuser's areas of Interest (y/n)
- MILC_CHAR: @ ; MILC command character (default=@)
- SHOW_CALLERNUM: Y ; Show Caller Number for node
- SHOW_DLS: Y ; Show number of Downloads/file during file listings (Y/N)
- REMOTE_MAIL: N ; Default RMAIL setting for new users (Y/N)
- NEWUSER_TIME: 60 ; Newuser Time Limit (minutes)
- LINES_SCREEN: 23 ; Newuser default for lines per screen
- LOWEST_BAUD: 1200 ; Lowest baud rate allowed
- FILE_U_AREAS: A ; File Upload Areas
- FILE_D_AREAS: AZ ; File Download Areas
- FILE_L_AREAS: AZ ; File List Areas
- MSG_R_AREAS: AWZ ; Message Read Areas
- MSG_W_AREAS: AZ ; Message Write Areas
- MSG_L_AREAS: AWZ ; Message List Areas
- DISP_CMDS: AO ; "Display" Commands (@A-@Z)
- RJE_AREA: Z ; File section area letter for placement of RJE results
- COMMENT_AREA: Z ; Message area for Comments
- STARTUP_TYPE: W ; Session Startup Type (F=Fullscreen, W=Windowed
- FILEDES_AREA: X ; Message area for file descriptions
- PRIVMSG_AREA: W ; Message area for private messages
- PRIVATE_MSGS: y ; Allow Private Messages (y/n)
- VERIFY_PHONE: 6 ; Verify Ph# after every x calls (0-255)
- VERIFY_DOB: 8 ; Verify DOB after every x calls (0-255)
- DEL_MSGS: y ; Allow Message deletion (y/n)
- LOG_MSGS: n ; Report messages read to log (y/n)
- LOG_TIME: N ; Prefix timestamp (hh:mm.ss) to activity log statments (y/n)
- SYSOP_LVL: 1000 ; Sysop Security Level
- SYSOP_MAIL_LVL: 900 ; Security Level to read private sysop mail
- DISPLAY_PW_FILES: y ; Display Password Protected Files (y/n)
- UPLOAD_COMP: 2 ; Upload Compensation (0-255) minutes
- MSG_COMP: 1 ; Message Compensation (0-255) seconds/word
- UL_DL_RATIO: 10 ; Upload/Download Ratio
- DL_BYTES: 400000 ; Download Bytes allowed per day
- DL_FILES: 10 ; Number of files allowed to download per day
- MAX_TIME_CALL: 120 ; Maximum time limit for any caller
- DAILY_TIME: 30 ; Daily time limit for new user
- TIME_UNIT: d ; D=Daily, W=Weekly, M=Monthly, Y=Yearly
- PRORATE: n ; y=Prorate for weekly, monthly & yearly users, n=no prorate
- PRINTER: nul ; printer device name (ie: PRN, COM3, LPT2, etc)
- SUB_FILEDEL: y ; y=delete upload credit if user deletes file, n=keep ul credit
- FREE_DL_AREAS: CZ ; Download Areas not affecting DL/UL ratio
- BLOCK_WRITES: y ; Use Block Writes when no MILC in display file. y=yes, n=no
- NEW_MAIL: A ; A=Ask, F=Force, B=Bypass new mail check file.
- VERIFY_GOODBYE: Y ; Y=Verify Goodbye, N=No verify (just log off)
- BADCMDMSG: N ; Y=Issue Message for unauthorized menu commands, N=don't
- NOANSI: N ; Y=Deactive ANSI color, N=ANSI color ok
- NOXFRTIME: N ; Y=Timer inactive for file xfers, N=Normal BBS xfr operation
- ;
- ; ------ Main Menu Definition ------
- ;
- MAINMENU_MSG: M,5,[M]essage Section
- MAINMENU_FILE: F,5,[F]iles Section
- MAINMENU_RJE: R,5,[R]emote Job Entry Section
- MAINMENU_BULLETIN: B,5,[B]ulletin Section
- MAINMENU_QUESTION: Q,5,[Q]uestionairre Section
- MAINMENU_COMMENT: C,5,[C]omment to Sysop
- MAINMENU_PAGESYS: Y,5,[Y]ell for Sysop
- MAINMENU_WHO: W,5,[W]ho is on?
- MAINMENU_CHAT: S,5,[S]peak with Others (Group Chat)
- MAINMENU_INITIAL: I,5,[I]nitial Welcome Screen
- MAINMENU_USERS: U,5,[U]ser List/Search/Interests
- MAINMENU_PARMS: E,5,[E]nvironment Settings (your defaults)
- MAINMENU_STATS: V,5,[V]iew System Statistics
- MAINMENU_CHILD: D,5,[D]oors (Child Processes)
- MAINMENU_NEWS: N,5,[N]ewsletter
- MAINMENU_GOODBYE: G,5,[G]oodbye - Logoff
- MAINMENU_EXPERT: T,5,[T]oggle Expert Level
- MAINMENU_HELP: ?,5,[?] Help!
- MAINMENU_SYSOP: X,25,[X] Sysop Use Only
- MAINMENU_OPT1: 1,1000,[1] MAIN Option 1
- MAINMENU_OPT2: 2,1000,[2] MAIN Option 2
- ;
- ; ------ Message Menu Definition ------
- ;
- MSGMENU_QUIT: Q,5,[Q]uit to Main Menu
- MSGMENU_UPDT: C,5,[C]hange Msg Area
- MSGMENU_READ: R,5,[R]ead Messages
- MSGMENU_SCAN: S,5,[S]can Messages
- MSGMENU_ENTER: E,6,[E]nter a Message
- MSGMENU_KILL: D,6,[D]elete a Message
- MSGMENU_SRCH: T,5,[T]ext Search
- MSGMENU_CHECK: P,5,[P]ersonal Mail Check
- MSGMENU_GOODBYE: G,5,[G]oodbye - Logoff
- MSGMENU_HELP: ?,5,[?] Help!
- MSGMENU_BASE: M,1000,[M]essage Base Change
- MSGMENU_OPT1: 1,1000,[1] MSG Option 1
- MSGMENU_OPT2: 2,1000,[2] MSG Option 2
- MSGMENU_BASEUP: +,9999,[+] Change to Next MsgBase
- MSGMENU_BASEDN: -,9999,[-] Change to Previous MsgBase
- ;
- ; ------ File Menu Definition ------
- ;
- FILEMENU_QUIT: Q,5,[Q]uit to Main Menu
- FILEMENU_INFO: I,5,[I]nfo on a file
- FILEMENU_LIST: L,5,[L]ist Available Files
- FILEMENU_DL: D,5,[D]ownload File(s) From BBS to you
- FILEMENU_UL: U,6,[U]pload File(s) to BBS from you
- FILEMENU_NEW: N,5,[N]ew Files Since Last [N]
- FILEMENU_SRCH: T,5,[T]ext Search (with Date Option)
- FILEMENU_STATS: S,5,[S]tats on Uploads/Downloads
- FILEMENU_GOODBYE: G,5,[G]oodbye - Logoff
- FILEMENU_HELP: ?,5,[?] Help!
- FILEMENU_EXT: A,5,[A]ccess compressed (ARC or ZIP) file
- FILEMENU_READ: R,5,[R]ead an ASCII file
- FILEMENU_CHANGE: C,6,[C]hange File you Uploaded
- FILEMENU_MAKELIST: M,5,[M]ake .ARC listing of available files
- FILEMENU_BASE: F,1000,[F]ile Base Change
- FILEMENU_OPT1: 1,1000,[1] FILE Option 1
- FILEMENU_OPT2: 2,1000,[2] FILE Option 2
- FILEMENU_UTILS: E,5,[E]asy Utils (Mark,UnMark,etc)
- FILEMENU_BASEUP: +,9999,[+] Change to Next FileBase
- FILEMENU_BASEDN: -,9999,[-] Change to Previous FileBase
- ;
- ; ------ RJE Menu Definition ------
- ;
- RJEMENU_QUIT: Q,5,[Q]uit to Main Menu
- RJEMENU_STATUS: S,5,[S]tatus of RJE Jobs
- RJEMENU_LIST: L,5,[L]ist/Execute RJE Jobs
- RJEMENU_DELETE: K,5,[K]ill an active RJE Job
- RJEMENU_FILES: C,5,[C]ompleted files ready for Download
- RJEMENU_SYSOP: X,1000,[X] Sysop Use
- RJEMENU_HELP: ?,5,[?] Help!
- RJEMENU_GOODBYE: G,5,[G]oodbye - Logoff
- RJEMENU_OPT1: 1,1000,[1] RJE Option 1
- RJEMENU_OPT2: 2,1000,[2] RJE Option 2
- ;
- ; ------ Sysop Menu Definition ------
- ;
- SYSMENU_QUIT: Q,25,[Q]uit to Main Menu
- SYSMENU_CMD: O,25,[O]per. System OS/2 Command Interpreter
- SYSMENU_PRINT: P,25,[P]rint User Database
- SYSMENU_MSG: M,25,[M]essage Database Area
- SYSMENU_USER: U,25,[U]ser Database Area
- SYSMENU_FILE: F,25,[F]ile Database Area
- SYSMENU_ACTIVITY: A,25,[A]ctivity Log Listing
- SYSMENU_REMOTE: R,25,[R]emote Sysop
- SYSMENU_STATS: S,25,[S]tats of Databases
- SYSMENU_HELP: ?,25,[?] Help!
- SYSMENU_GOODBYE: G,25,[G]oodbye - Logoff
- SYSMENU_OPT1: 1,1000,[1] SYS Option 1
- SYSMENU_OPT2: 2,1000,[2] SYS Option 2
-